Brother International MFC-970MC Users Manual - English - Page 30
Outgoing Message (OGM), Connecting an External Telephone
View all Brother International MFC-970MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
20 CHAPTER TWO Outgoing Message (OGM) Timing is important in recording this message. The message sets up the ways to handle both manual and automatic fax reception. 1 Record 5 seconds of silence at the beginning of your message. (This allows your FAX/MFC time to listen for the fax CNG tones of automatic transmissions before they stop.) 2 Limit your speaking to 20 seconds. 3 End your 20-second message by giving your Fax Receive Code for people sending manual faxes. For example: "After the beep, leave a message or send a fax by pressing 5 1 and Start." Connecting an External Telephone Your FAX/MFC is equipped with a handset that you can use as a regular phone. However, you can also connect a separate telephone (or telephone answering device) directly to your FAX/MFC. Connect the modular plug on the telephone's line cord to the jack labeled EXT. on the left side of the FAX/MFC. Whenever this phone (or TAD) is in use, the screen displays "EXT. TEL IN USE," and, if the FAX/MFC handset is lifted, an alarm sounds. To disconnect the call on the external phone and switch to the FAX/MFC, press Hook or Speaker Phone .