Brother International MFC-970MC Users Manual - English - Page 32
Alternating Displays, Function Selection Table, FAX: NO. & START, COPY: PRESS COPY - owner manual
View all Brother International MFC-970MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
22 CHAPTER THREE Alternating Displays When you see alternating displays, the LCD sometimes alternates between the currently selected option, and a help message giving brief instructions about how to proceed. The display you'll probably see most often is shown below, showing you, when you place a document in the feeder, that you can dial a number and send a fax, or you can make a copy. FAX: NO. & START COPY: PRESS COPY Function Selection Table If you have a basic understanding of how to program your FAX/MFC, you can perform most of the programming settings without the Owner's Manual. To help you understand the function selections, options, and settings that are found in your fax programs, use the Function Selection Table below. 1. INITIAL SETUP Function Description 1. TONE/PULSE Selects dialing mode. 2. DATE/TIME Enter date and time for LCD display and to print on transmissions. 3. STATION ID Program name, fax number and telephone number to appear on each transmitted page. 4. BEEPER Adjust volume level of beeper. Factory Set TONE 1999 1/1 00:00 - LOW More Info p. 27 pp. 27, 28 p. 28 p. 30 2. SETUP RECEIVE Function Description Factory Set More Info 1. RING DELAY Number of rings before FAX/MFC RING DELAY: 04 pp. 35, 85 answers in FAX/TEL, FAX, or MC (FAX 870MC and MFC TOLLSAVER:OFF 970MC only) modes. (FAX 870MC and MFC 970MC only) 2. F/T RING TIME Sets the time for "double ring" in 20 p. 35 FAX/TEL mode. 3. EASY RECEIVE Receive fax messages without O N p. 36 pressing the Start key. 4. REMOTE CODE Enter code to activate or deactivate ON ( 51, #51) p. 40 machine from a remote location.