Brother International MFC-970MC Users Manual - English - Page 53
Setting Multi-Function Link Mode (For MFC 970MC Only), Distinctive Ringing, MF LINK
View all Brother International MFC-970MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
43 S E T U P R E C E I V E See Multi-Function Link (option) for FAX 750, FAX 770 and FAX 870MC p. 141 Setting Multi-Function Link Mode (For MFC 970MC Only) If you connect your FAX/MFC to your PC, you can receive faxes into your PC. See chapter 15 to set up for Multi-Function Link (for MFC 970MC only). After completing all setup for Multi-Function Link, you can select Multi-Function Link Mode (PC Primary/PC Receive Only/Fax Receive Only) for routing incoming faxes. 1 Press Function , 2 , 8 . The screen displays 8.MF LINK 2 Press or to select PC PRIMARY, PC RECEIVE ONLY or FAX RECEIVE ONLY. 3 Press Set when the screen displays your selection. 4 Press Stop to exit. Distinctive Ringing This FAX/MFC feature lets you use the Distinctive Ringing subscriber service offered by some telephone companies, which allows you to have several telephone numbers on one phone line. Each phone number has its own Distinctive Ringing pattern, so you know which phone number is ringing. This is one way you can have a separate phone number for your FAX/MFC. Your FAX/MFC has a Distinctive Ringing function, allowing you to dedicate one phone number just for receiving faxes. You'll need to follow the directions below to "register" the new Distinctive Ringing pattern, that was assigned by the Telephone Company, so your FAX/MFC can recognize its incoming calls. You can change or cancel the Distinctive Ringing pattern at any time. You can switch it off temporarily, then turn it back on. When you get a new fax number, make sure you reset this function. You can register only one Distinctive Ringing pattern with the FAX/MFC. Some ringing patterns cannot be registered. s The FAX/MFC will answer only calls to its registered number. s To have your TAD answer only the main number, the FAX/MFC must be in Manual Mode. s In FAX/TEL or FAX ONLY mode, the FAX/MFC will answer all numbers on the phone line.