Brother International MFC-970MC Users Manual - English - Page 60

50 CHAPTER SIX See Resolution p. 55 s Press Resolution (before you send the fax) to select the resolution for the document you're sending. s DO NOT use curled, wrinkled, folded or ripped paper, or paper with staples, paper clips, paste or tape attached. DO NOT use cardboard, newspaper or fabric. s Make sure documents written with ink are completely dry. See One-Touch Dialing p. 68 Manual Transmission Manual transmission lets you hear the dial tone, ringing and fax receiving tones before sending the fax. 1 Insert the document face down in the feeder. 2 Pick up the handset and listen for a dial tone -OR-press Hook or Speaker Phone and listen for a dial tone. 3 Enter the fax number you want to call (you can enter the digits using the dial pad, or you can enter a One Touch or Speed Dial number or you can call from the Tel-index). 4 When you hear the fax tone, press Start . 5 If you're using the handset, hang up. See Speed Dialing p. 68 Automatic Transmission This is the easiest way to send a fax. IMPORTANT: Do not pick up the handset, or press Hook or Speaker Phone . 1 Insert the document face down in the feeder. 2 Enter the fax number from One Touch, Speed Dial, Tel-index or the dial pad. 3 Press Start . Manual and Automatic Fax Redial If you're sending a fax manually and the line is busy, press Redial/Pause to retry the number. If you're sending a fax automatically and the line is busy, the FAX/MFC will redial automatically up to three times at 5 minute intervals.