Cisco 7962G Administration Guide - Page 137
Disabling and Enabling Web Access
UPC - 882658140341
View all Cisco 7962G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely Disabling and Enabling Web Page Access - Debug Display-Displays debug messages that might be useful to Cisco TAC if you require assistance with troubleshooting. For more information, see the "Device Logs" section on page 8-11. • Streaming Statistics-Includes the following hyperlinks - Stream 1, Stream 2, Stream 3, Stream 4, or Stream 5-Display a variety of streaming statistics. For more information, see the "Streaming Statistics" section on page 8-11. Disabling and Enabling Web Page Access For security purposes, you may choose to prevent access to the web pages for a phone. If you do so, you will prevent access to the web pages that are described in this chapter and to the Cisco Unified Communications Manager User Options web pages. To disable access to the web pages for a phone, follow these steps from Cisco Unified Communications Manager Administration. Procedure Step 1 Step 2 Step 3 Step 4 Step 5 Choose Device > Phone. Specify the criteria to find the phone and click Find, or click Find to display a list of all phones. Click the device name to open the Phone Configuration window for the device. Scroll down to the Product Specific Configuration section. From the Web Access drop-down list box, choose Disabled. Click Update. Note Some features, such as Cisco Quality Report Tool, do not function properly without access to the phone web pages. Disabling web access also affects any serviceability application that relies on web access, such as CiscoWorks. To enable web page access when it is disabled, see the preceding steps about disabling access. Follow the same steps, but choose Enabled in Step 4 to enable the web page. OL-14625-01 Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1 8-3