Cisco 7962G Administration Guide - Page 78
Device >, Device Settings > SIP Profile, Displays the end Real-Time Transport Protocol RTP
UPC - 882658140341
View all Cisco 7962G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Device Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone Table 4-3 SIP General Configuration Menu Options (continued) Option Register Expires Phone Label Enable VAD Start Media Port End Media Port Backup Proxy Backup Proxy Port Emergency Proxy Emergency Proxy Port Outbound Proxy Outbound Proxy Port NAT Enabled NAT Address Call Statistics Description To Change Displays the amount of time, in seconds, after which a registration request expires. From Cisco Unified Communications Manager Administration, choose Device > Device Settings > SIP Profile. Displays the text that is displayed on the top right status line of the LCD on the phone. This text is for end-user display only and has no effect on caller identification or messaging. This value will always be set to null. Display only-cannot configure. Displays if voice activation detection (VAD) is enabled. From Cisco Unified Communications Manager Administration, choose Device > Device Settings > SIP Profile. Displays the start Real-Time Transport Protocol (RTP) range for media. From Cisco Unified Communications Manager Administration, choose Device > Device Settings > SIP Profile. Displays the end Real-Time Transport Protocol (RTP) range for media. From Cisco Unified Communications Manager Administration, choose Device > Device Settings > SIP Profile. Displays the IP address of the backup proxy server or gateway. This value will always be set to USECommunications Manager. Display only-cannot configure. Displays the port number of the backup proxy server or Display only-cannot configure. gateway. This value will always be set to 5060. Displays the IP address of the emergency proxy server or Display only-cannot configure. gateway. This value will always be set to USECommunications Manager. Displays the port number of the emergency proxy server Display only-cannot configure. or gateway. This value will always be set to 5060. Displays the IP address of the outbound proxy server. This value will always be set to USECommunications Manager. Display only-cannot configure. Displays the port number of the outbound proxy server. Display only-cannot configure. This value will always be set to 5060. Displays if Network Address Translation (NAT) is enabled. This value will always be set to false. Display only-cannot configure. Displays the WAN IP address of the NAT or firewall server. This value will always be set to null. Display only-cannot configure. Displays if call statistics are enabled on the phone. From Cisco Unified Communications Manager Administration, choose Device > Device Settings > SIP Profile. 4-12 Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1 OL-14625-01