Cisco 7962G Administration Guide - Page 86
Device > Phone > Phone, > User Preferences > Audio
UPC - 882658140341
View all Cisco 7962G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Device Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone Table 4-10 Media Configuration Menu Options (continued) Option Recording Tone Duration Description To Change Indicates the length of time in milliseconds for which the beep tone plays. If the value you configure here is less than one third the interval, then this value overrides the default provided by the Network Locale. From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. Range: 0 to 3000 Note For some Network Locales that use a complex cadence, this setting applies only to the first beep tone. Wideband Headset Enterprise Advertise G.722 Codec Device Advertise G.722 Codec See also: Recording Tone Indicates whether wideband is enabled or disabled for the headset. Default: Disabled • If Wideband Headset UI Control is enabled, you or the user can use the phone and choose > User Preferences > Audio Preferences > Wideband Headset. • If Wideband Headset UI Control is disabled, from Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration to set this value. Note If you allowed this option to be user controllable (in the Wideband Headset UI Control option), the user-configured value takes precedence. Enables/disables Cisco Unified IP Phones to advertise the G.722 codec to Cisco Unified Communications Manager. If enabled (default), and if each endpoint in the attempted call supports G.722 in its capabilities set, Cisco Unified Communications Manager will choose G.722 for the call. From Cisco Unified Communications Manager Administration, choose System > Enterprise Parameters. Note When a phone is registered with a Cisco Unified Communications Manager that does not support this setting, the default is "Disabled." Allows you to override the Enterprise Advertise From Cisco Unified Communications Manager G.722 Codec on a per-phone basis. Administration, choose Device > Phone. The default is "Use System Default," which means the value configured for the Enterprise Advertise G.722 Codec parameter gets used. 4-20 Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1 OL-14625-01