Cisco 7962G Administration Guide - Page 77
SIP Configuration Menu (SIP Phones Only), SIP General Configuration Menu
UPC - 882658140341
View all Cisco 7962G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Chapter 4 Configuring Settings on the Cisco Unified IP Phone Device Configuration Menu • SRST designation-Indicates a Survivable Remote Site Telephony router capable of providing Cisco Unified Communications Manager functionality with a limited feature set. This router assumes control of call processing if all other Cisco Unified Communications Manager servers become unreachable. The SRST Cisco Unified Communications Manager always appears last in the list of servers, even if it is active. For more information, refer to Cisco Unified Communications Manager Administration Guide. You configure an SRST router address in the Cisco Unified Communications Manager Administration SRST Reference Configuration window (choose System > SRST). You configure an SRST reference in the Device Pool Configuration window (choose System > Device Pool). • TFTP designation-Indicates that the phone was unable to register with a Cisco Unified Communications Manager listed in its configuration file, and it registered with the TFTP server instead. • Authentication icon-Appears as a shield and indicates that the connection to the Cisco Unified Communications Manager is authenticated. For more information about authentication, refer to Cisco Unified Communications Manager Security Guide. • Encrypted icon-Appears as a padlock and indicates that the connection to the Cisco Unified Communications Manager is authenticated and encrypted. For more information about authentication and encryption, refer to Cisco Unified Communications Manager Security Guide. SIP Configuration Menu (SIP Phones Only) The SIP Configuration menu contains these sub-menus: • SIP General Configuration Menu, page 4-11 • Line Settings Menu, page 4-13 SIP General Configuration Menu The SIP General Configuration menu displays information about the configurable SIP parameters on the phone. Table 4-3 describes the options in this menu. Table 4-3 SIP General Configuration Menu Options Option Preferred CODEC Out of Band DTMF Register with Proxy Description To Change Displays the CODEC to use when a call is initiated. This Display only-cannot configure. value will always be set to none. Displays the configuration of the out-of-band signaling (for tone detection on the IP side of a gateway). The Cisco Unified IP phone (SIP) supports out-of-band signaling by using the AVT tone method. This value will always be set to avt. Display only-cannot configure. Displays if the phone must register with a proxy server Display only-cannot configure. during initialization. This value will always be set to true. OL-14625-01 Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1 4-11