Cisco NM-8B-U User Guide - Page 134
EtherChannel Load Balancing Example, Layer 2 EtherChannels Example, Removing an EtherChannel Example
UPC - 074632001001
View all Cisco NM-8B-U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
16- and 36-Port Ethernet Switch Module for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Configuration Examples for the 16- and 36-Port Ethernet Switch Module Router(vlan)# exit APPLY completed. Exiting.... Router# EtherChannel Load Balancing Example • Layer 2 EtherChannels Example, page 134 • EtherChannel Load Balancing Example, page 134 • Removing an EtherChannel Example, page 134 Layer 2 EtherChannels Example The following example shows Fast Ethernet interfaces 5/6 and 5/7 being configured into port-channel 2 with PAgP mode desirable: Router# configure terminal Router(config)# interface range fastethernet 5/6 -7 Router(config-if)# channel-group 2 mode desirable Router(config-if)# end EtherChannel Load Balancing Example The following example shows EtherChannel being configured to use source and destination IP addresses: Router# configure terminal Router(config)# port-channel load-balance src-dst-ip Router(config)# end Router(config)# Removing an EtherChannel Example The following example shows port-channel 1 being removed: Router# configure terminal Router(config)# no interface port-channel 1 Router(config)# end Note Removing the port-channel also removes the channel-group command from the interfaces belonging to it. 802.1x Authentication Examples • Enabling 802.1x Authentication Example, page 135 • Configuring the Switch-to-RADIUS-Server Communication Example, page 135 • Enabling Periodic Re-Authentication Example, page 135 • Changing the Quiet Period Example, page 135 • Changing the Switch-to-Client Retransmission Time Example, page 135 134 Cisco IOS Release 12.2(2)XT, 12.2(8)T, and 12.2(15)ZJ