Cisco NM-8B-U User Guide - Page 220
show ip access-lists
UPC - 074632001001
View all Cisco NM-8B-U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
show ip access-lists 16- and 36-Port Ethernet Switch Module for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series show ip access-lists To display IP access control lists (ACLs) configured on the switch, use the show ip access-lists command in privileged EXEC mode. show ip access-lists [name | number] Syntax Description name number (Optional) ACL name. (Optional) ACL number. The range is from 1 to 199 and from 1300 to 2699. Command Modes Privileged EXEC Command History Release 12.1(6)EA2 12.2(15)ZJ Modification This command was introduced. This command was implemented on the following platforms: Cisco 2600 series, Cisco 3600 series, and Cisco 3700 series routers. Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Examples The following is sample output from the show ip access-lists command: Switch# show ip access-lists Standard IP access list testingacl permit 10.10.10.2 Standard IP access list wizard_1-1-1-2 permit 1.1.1.2 Extended IP access list 103 permit tcp any any eq www Extended IP access list CMP-NAT-ACL Dynamic Cluster-HSRP deny ip any any Dynamic Cluster-NAT permit ip any any permit ip host 10.245.155.128 any permit ip host 10.245.137.0 any permit ip host 10.146.106.192 any permit ip host 10.216.25.128 any permit ip host 10.228.215.0 any permit ip host 10.221.111.64 any permit ip host 10.123.222.192 any permit ip host 10.169.110.128 any permit ip host 10.186.122.64 any The following is sample output from the show ip access-lists 103 command: Switch# show ip access-lists 103 Extended IP access list 103 permit tcp any any eq www 220 Cisco IOS Release 12.2(2)XT, 12.2(8)T, and 12.2(15)ZJ