Cisco NM-8B-U User Guide - Page 186
deny access-list configuration, service-policy, show access-lists, Controls access to an interface.
UPC - 074632001001
View all Cisco NM-8B-U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
ip access-list 16- and 36-Port Ethernet Switch Module for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Examples The following example shows how to configure a standard ACL named Internetfilter1: Switch(config)# ip access-list standard Internetfilter1 Switch(config-std-nacl)# permit 192.5.34.0 0.0.0.255 Switch(config-std-nacl)# permit 192.5.32.0 0.0.0.255 Switch(config-std-nacl)# exit The following example shows how to configure an extended ACL named Internetfilter2: Switch(config)# ip access-list extended Internetfilter2 Switch(config-ext-nacl)# permit any 128.8.10.0 0.0.0.255 eq 80 Switch(config-ext-nacl)# permit any 128.5.8.0 0.0.0.255 eq 80 Switch(config-ext-nacl)# exit Note In these examples, all other IP access is implicitly denied. You can verify your settings by entering the show access-lists or show ip access-lists privileged EXEC command. Related Commands Command deny (access-list configuration) dot1x re-authenticate permit (access-list configuration) service-policy show access-lists show ip access-lists Description Configures conditions for an IP ACL. Controls access to an interface. Configures conditions for an IP ACL. Applies a policy map to the input of an interface. Displays ACLs configured on the switch. Displays IP ACLs configured on the switch. 186 Cisco IOS Release 12.2(2)XT, 12.2(8)T, and 12.2(15)ZJ