Dell PowerEdge 4300 Dell PowerEdge 4300 Systems User's Guide - Page 95
Qvwdoohg
View all Dell PowerEdge 4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
3. Select the card(s) you want to unlock and press . 4. Press to exit the Advanced menu. If there is a resource conflict between two ISA expansion cards and you want to remove the card that conflicts with the one you just installed, use the following procedure: 1. From the Steps in configuring your computer menu, select Step 2: Add or remove boards and press . From the list of expansion slots and cards, select the card in conflict with the one installed, and press . When the utility asks you to confirm your command, press . Then press to return to the Steps in configuring your computer menu. 2. Select Step 5: Save and exit and press . 3. Select Save the configuration and restart the computer, and press . The system reboots with the new system configuration information. 4. If you deleted an expansion-card configuration file from the previously saved system configuration information, remove the card from your computer. For instructions on removing the expansion card, see "Removing an Expansion Card" in Chapter 8 of the Installation and Troubleshooting Guide. Using the Resource Configuration Utility 5-13