Dell PowerEdge M420 Hardware Owner's Manual - Page 106

Table 1-26. Blade Messages (continued) Message Causes Corrective Actions Warning: PCIe expansion riser not found. Check mezzanine interface card and cables. This warning occurs if Ensure that the expansion- BIOS does not discover card riser is installed in the the expansion-card riser system, If applicable, during POST. BIOS reinstall the expansion-card continues with POST after riser and check all cable displaying this warning to connections. See the console. "Expansion-Card Riser NOTE: Applicable to M610x only. (PowerEdge M610x Only)" on page 221. If the problem persists, the expansion-card riser may be faulty. See "Getting Help" on page 337. Error: Unsupported mezzanine card configuration. This error occurs if the type and configuration of mezzanine cards installed are not supported. Ensure that the mezzanine cards installed are supported by the blade. See "I/O Module Mezzanine Cards" on page 198. Verifying blade power... Status message that BIOS Information only. is waiting for iDRAC/CMC to grant power to the blade before proceeding with POST. Cannot Power ON. Cables are not installed properly or Mezz IFC FRU is corrupted The cables in expansion Ensure that PCIe expansion are not installed properly cables are connected or Mezz IFC FRU is properly. If required, reseat corrupted. the Mezz IFC FRU. If the NOTE: Applicable to M610x only. problem persists, see "Getting Help" on page 337. Expansion Cables are not installed properly PCIe expansion cables not Ensure that PCIe expansion installed properly. cables are connected NOTE: Applicable to M610x properly. only. 106 About Your System