Dell PowerEdge M420 Hardware Owner's Manual - Page 43
Resynchronizing the Server List at the Remote Client Workstation
View all Dell PowerEdge M420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Resynchronizing the Server List at the Remote Client Workstation Once the iKVM switch is connected, the blades appear in OSCAR. You now need to resynchronize the servers on any remote workstation to ensure that the blades are available to any remote users connected to the console switch through the Remote Console Switch software. NOTE: This procedure only resynchronizes one remote client workstation. With multiple client workstations, save the resynchronized local database and load it into the other client workstations to ensure consistency. To resynchronize the server listing: 1 Click Resync in the Server category of the Management Panel (MP). The Resync Wizard launches. 2 Click Next. A warning message displays indicating that the database is updated to match the current configuration of the console switch. Your current local database names may be overridden with the switch names. To include unpowered SIPs in the resynchronization, click to enable the Include Offline SIPs check-box. 3 Click Next. A Polling Remote Console Switch message box appears with a progress bar indicating that the switch information is being retrieved. 4 If no changes were detected in the appliance, a completion dialog box appears with this information. If server changes were detected, then the Detected Changes dialog box is displayed. Click Next to update the database. 5 If a cascade switch was detected, the Enter Cascade Switch Information dialog box appears. Select the type of switch connected to the appliance from the drop-down list. If the type you are looking for is not available, you can add it by clicking Add. 6 Click Next. The completion dialog box appears. 7 Click Finish to exit. 8 Start up the analog switch and the system. About Your System 43