Dell PowerEdge M420 Hardware Owner's Manual - Page 13

1 About Your System Accessing System Features During Start-up Keystroke Description Enters the System Setup program. See "Using the System Setup Program and UEFI Boot Manager" on page 127. Enters the LifeCycle Controller or utility partition on your system from which you can access utilities such as system diagnostics, or install operating systems that support UEFI. NOTE: LifeCycle Controller is supported on M610, M610x, M710, M710HD, and M910. Boot Mode set to BIOS: Enters the BIOS Boot Manager, which allows you to select a boot device. Boot Mode set to UEFI: Enters the UEFI Boot Manager, which enables you to manage your system's boot options. Enters PXE boot (if enabled in System Setup program). Enters the remote access utility, which allows access to the system event log (SEL) and configuration of remote access to the system. Enters the SAS Configuration Utility. See your SAS adapter documentation for more information. Enters the RAID configuration utility. For more information, see the documentation for your RAID card. Enters the utility to configure NIC settings for PXE boot. For more information, see the documentation for your integrated NIC. About Your System 13