Dell PowerEdge M420 Hardware Owner's Manual - Page 37
iKVM Module
View all Dell PowerEdge M420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Table 1-6. Fan Indicators Indicator Indicator Description State Power indicator Green The power supply is connected to an AC power source. Off AC power not connected. Fault indicator Amber The fan is in a fault condition. Off Fan not faulty. iKVM Module The optional Avocent iKVM analogue switch module includes the following features: • Local iKVM access can be remotely disabled on a per blade basis, using the blade's iDRAC interface (access is enabled by default). NOTE: By default (enabled), a console session to a given blade is available to both the iDRAC interface and iKVM (users connected to a blade's console via iDRAC and the iKVM sees the same video and be able to type commands). If this sharing is not desired, this can be disabled via the iDRAC console interface. • The following connectors: - One VGA connector. The iKVM supports a video display resolution range from 640x480 at 60 Hz up to 1280x1024x65,000 colors (noninterlaced) at 75 Hz. - Two USB ports for keyboard and mouse. NOTE: The iKVM USB ports do not support storage devices. - RJ-45 ACI port for tiering with Dell™ and Avocent analog KVM and KVM over IP switches with ARI ports. NOTE: Although the ACI port is an RJ-45 connector and uses Cat5 (or better) cabling, it is not an Ethernet network interface port. It is only used for connection to external KVM switches with Analog Rack Interface (ARI) ports, and does not support native KVM over IP. About Your System 37