Dell PowerEdge M420 Hardware Owner's Manual - Page 123

Table 1-26. Blade Messages (continued) Message Causes Corrective Actions Memory set to The memory frequency minimum frequency. may be intentionally set lower for power conservation. If not an intentional setting, check any other system messages for possible causes. The current memory Ensure that your memory configuration may support configuration supports the only the minimum higher frequency. See frequency. "System Memory" on page 159. Warning! A fatal error has caused system reset. Please check the event log for details. Unspecified error. Check the system event log for information about the error. Warning! Following faulty DIMMs are disabled: DIMMxx, DIMMyy. Faulty or improperly seated memory modules. See "Troubleshooting Blade Memory" on page 297. Warning! No microcode update loaded for processor n. Unsupported processor. Update the BIOS firmware using the Dell Support website at support.dell.com. Warning: The current memory configuration is not validated. Change it to the recommended memory configuration or press any key to continue. There is no memory See "System Memory" on configuration error, but page 159. the memory configuration is not recommended by Dell. About Your System 123