Dell PowerEdge M420 Hardware Owner's Manual - Page 92

1 link indicator (16) 3 RJ45 Ethernet connector (16) 5 status/identification indicator 2 activity indicator (16) 4 power indicator NOTE: Connectors on the Ethernet pass-through module correspond directly to the blade number. For example, blade 5 is connected to port 5 on the Ethernet passthrough module. Integrated network adapter 1 maps to I/O slot A1. Integrated network adapter 2 maps to I/O slot A2. Table 1-24. Ethernet Pass-through Module Indicators Indicator Type Pattern Description Link Green on, indicator/activity amber indicator blinking The Ethernet connector is linked to the blade and there is network activity. Green on, amber off The Ethernet connector is linked to the blade and there is no network activity. Green off, amber blinking The Ethernet connector is not linked to the blade and there is network activity. Green The Ethernet connector is not linked to the blade off/amber off and there is no network activity. Power indicator Off Power to the module is off. Green Module has power. Status/ identification indicator Blue on Amber flashing Active module. Fault condition in module. NOTE: Ethernet media speed is configured through the blade LOM firmware or by the operating system. Speed and duplex settings are not configured through the passthrough module itself. 92 About Your System