Dell PowerEdge MX740c EMC PowerEdge MX740c Installation and Service Manual - Page 102

Installing the Mezzanine card, Removing the Mezzanine card

Get Dell PowerEdge MX740c PDF manuals and user guides View all Dell PowerEdge MX740c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 102 highlights

Figure 74. Removing the Mezzanine card Next steps 1. Install the Mezzanine card. 2. Follow the procedure listed in After working inside your sled on page 42. Installing the Mezzanine card Prerequisites 1. Follow the safety guidelines listed in Safety Instructions. 2. Follow the procedure listed in Before working inside the sled. NOTE: A dual-processor configuration is required to support the Mezzanine B1 card. Steps 1. Align the connector on the Mezzanine card with the connector on the system board. 2. Place the Mezzanine card on the connector and press the blue touch point until it is firmly seated. 3. Use the Phillips #2 screwdriver, tighten the captive screws on the Mezzanine card. 102 Installing and removing system components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
Figure 74. Removing the Mezzanine card
Next steps
1.
Install the Mezzanine card
.
2.
Follow the procedure listed in
After working inside your sled
on page 42.
Installing the Mezzanine card
Prerequisites
1.
Follow the safety guidelines listed in
Safety Instructions
.
2.
Follow the procedure listed in
Before working inside the sled
.
NOTE:
A dual-processor configuration is required to support the Mezzanine B1 card.
Steps
1.
Align the connector on the Mezzanine card with the connector on the system board.
2.
Place the Mezzanine card on the connector and press the blue touch point until it is firmly seated.
3.
Use the Phillips #2 screwdriver, tighten the captive screws on the Mezzanine card.
102
Installing and removing system components