Dell PowerEdge MX740c EMC PowerEdge MX740c Installation and Service Manual - Page 53
Installing a drive into drive carrier
View all Dell PowerEdge MX740c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Figure 24. Removing a drive from drive carrier Next steps 1. Replace the drive into the drive carrier. Installing a drive into drive carrier Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 41 Steps 1. Insert the drive into the drive carrier, with the connector end of the drive towards the back of the carrier. 2. Align the screw holes on the drive with the screw holes on the drive carrier. 3. Using the Phillips #1 screwdriver, replace the screws to secure the drive to the drive carrier. Installing and removing system components 53
Figure 24. Removing a drive from drive carrier
Next steps
1.
Replace the drive into the drive carrier
.
Installing a drive into drive carrier
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
on page 41
Steps
1.
Insert the drive into the drive carrier, with the connector end of the drive towards the back of the carrier.
2.
Align the screw holes on the drive with the screw holes on the drive carrier.
3.
Using the Phillips #1 screwdriver, replace the screws to secure the drive to the drive carrier.
Installing and removing system components
53