Dell PowerEdge MX740c EMC PowerEdge MX740c Installation and Service Manual - Page 66

Removing the BBU from the BBU cage, Installing the BBU

Get Dell PowerEdge MX740c PDF manuals and user guides View all Dell PowerEdge MX740c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

Figure 43. Installing the BBU 3. Connect the BBU cables to the connector on the system board. Next steps 1. Follow the procedure listed in the After working inside your sled. 2. Replace the drive carrier or a drive blank. Removing the BBU from the BBU cage Prerequisites 1. Follow the safety guidelines listed in Safety Instructions. 2. Follow the procedure listed in the Before working inside your sled. 3. Remove the BBU module. Steps 1. Using a Phillips #1 screwdriver, loosen the captive screw securing the BBU to the BBU cage. 2. Lift and slide the BBU out of the BBU cage. 66 Installing and removing system components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
Figure 43. Installing the BBU
3.
Connect the BBU cables to the connector on the system board.
Next steps
1.
Follow the procedure listed in the
After working inside your sled
.
2.
Replace the drive carrier
or a
drive blank
.
Removing the BBU from the BBU cage
Prerequisites
1.
Follow the safety guidelines listed in
Safety Instructions
.
2.
Follow the procedure listed in the
Before working inside your sled
.
3.
Remove the BBU module
.
Steps
1.
Using a Phillips #1 screwdriver, loosen the captive screw securing the BBU to the BBU cage.
2.
Lift and slide the BBU out of the BBU cage.
66
Installing and removing system components