Dell PowerEdge MX740c EMC PowerEdge MX740c Installation and Service Manual - Page 95

Removing a MicroSD card, Installing the IDSDM card

Get Dell PowerEdge MX740c PDF manuals and user guides View all Dell PowerEdge MX740c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 95 highlights

Figure 67. Installing the IDSDM card Next steps Follow the procedure listed in After working inside your sled. Removing a MicroSD card Prerequisites 1. Follow the safety guidelines listed in Safety Instructions. 2. Follow the procedure listed in Before working inside the sled. 3. Remove the IDSDM card. Steps 1. Locate the MicroSD card slot on the IDSDM card. NOTE: To locate IDSDM slot on the system board, see the system board jumpers and connectors. 2. Press the card to partially release from the slot. 3. Hold the MicroSD card and remove it from the slot. NOTE: Temporarily label each MicroSD card with the corresponding slot number after removal. Installing and removing system components 95

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
Figure 67. Installing the IDSDM card
Next steps
Follow the procedure listed in
After working inside your sled
.
Removing a MicroSD card
Prerequisites
1.
Follow the safety guidelines listed in
Safety Instructions
.
2.
Follow the procedure listed in
Before working inside the sled
.
3.
Remove the IDSDM card
.
Steps
1.
Locate the MicroSD card slot on the IDSDM card.
NOTE:
To locate IDSDM slot on the system board, see the
system board jumpers and connectors
.
2.
Press the card to partially release from the slot.
3.
Hold the MicroSD card and remove it from the slot.
NOTE:
Temporarily label each MicroSD card with the corresponding slot number after removal.
Installing and removing system components
95