Dell PowerEdge MX740c EMC PowerEdge MX740c Installation and Service Manual - Page 112
Installing the system board, Removing the system board
![]() |
View all Dell PowerEdge MX740c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Figure 84. Removing the system board Next steps 1. Install the system board. Installing the system board Prerequisites Follow the safety guidelines listed in Safety instructions on page 41. CAUTION: Do not lift the system board by holding a memory module, processor, or other components. CAUTION: Take care not to damage the system identification button while placing the system board into the system. Steps 1. Unpack the replacement system board assembly. CAUTION: Take care not to damage the system identification button while placing the system board into the chassis. NOTE: It is required to reactivate the licenses after the system board replacement. 2. Holding the system board by the edges, place the system board into the system. 3. Using the Phillips #2 screwdriver, secure the system board to the chassis with the screws. 112 Installing and removing system components
![](/manual_guide/products/dell-poweredge-mx7000-emc-poweredge-mx740c-installation-service-manual-49e067c/112.png)