Dell PowerEdge MX740c EMC PowerEdge MX740c Installation and Service Manual - Page 45

System cover, Removing the system cover

Get Dell PowerEdge MX740c PDF manuals and user guides View all Dell PowerEdge MX740c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Figure 15. Installing the sled into enclosure Next steps 1. Power on the sled. System cover The system cover protects the components inside the system and helps in maintaining air flow inside the system. Removing the system cover Prerequisites 1. Follow the safety guidelines listedin Safety instructions on page 41. 2. Power off the sled. 3. Remove the sled from the enclosure. 4. Place the sled on the flat surface with the top cover facing upwards. Steps 1. Press the blue release tab on the system cover and slide the cover towards the rear of the system. 2. Hold the cover on both sides, and lift the cover away from the system. Installing and removing system components 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
Figure 15. Installing the sled into enclosure
Next steps
1.
Power on the sled.
System cover
The system cover protects the components inside the system and helps in maintaining air flow inside the system.
Removing the system cover
Prerequisites
1.
Follow the safety guidelines listedin
Safety instructions
on page 41.
2.
Power off the sled.
3.
Remove the sled from the enclosure
.
4.
Place the sled on the flat surface with the top cover facing upwards.
Steps
1.
Press the blue release tab on the system cover and slide the cover towards the rear of the system.
2.
Hold the cover on both sides, and lift the cover away from the system.
Installing and removing system components
45