Dell PowerEdge MX740c EMC PowerEdge MX740c Installation and Service Manual - Page 94
Installing the IDSDM card, Removing the IDSDM card
![]() |
View all Dell PowerEdge MX740c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Figure 66. Removing the IDSDM card Next steps Install the IDSDM card. Installing the IDSDM card Prerequisites 1. Follow the safety guidelines listed in Safety Instructions. 2. Follow the procedure listed in Before working inside your sled on page 42. CAUTION: To prevent damage to the IDSDM card, you must hold the card only by its edges. Steps 1. Locate the IDSDM card connector on the system board. To locate IDSDM connector, see the system board jumpers and connectors section. 2. Align the IDSDM card with the connector on the system board. 3. Press the IDSDM card until it is firmly seated on the system board. 94 Installing and removing system components
![](/manual_guide/products/dell-poweredge-mx7000-emc-poweredge-mx740c-installation-service-manual-49e067c/94.png)
Figure 66. Removing the IDSDM card
Next steps
Install the IDSDM card
.
Installing the IDSDM card
Prerequisites
1.
Follow the safety guidelines listed in
Safety Instructions
.
2.
Follow the procedure listed in
Before working inside your sled
on page 42.
CAUTION:
To prevent damage to the IDSDM card, you must hold the card only by its edges.
Steps
1.
Locate the IDSDM card connector on the system board. To locate IDSDM connector, see the
system board jumpers and
connectors
section.
2.
Align the IDSDM card with the connector on the system board.
3.
Press the IDSDM card until it is firmly seated on the system board.
94
Installing and removing system components