Dell PowerEdge MX740c EMC PowerEdge MX740c Installation and Service Manual - Page 69
Installing the control panel
View all Dell PowerEdge MX740c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Figure 46. Removing the control panel Next steps 1. Install the control panel. Installing the control panel Prerequisites 1. Follow the safety guidelines listed in Safety Instructions. 2. Follow the procedure listed in Before working inside your sled. Steps 1. Align control panel with the slots on the system and slide it in. 2. Connect the control panel cable to the connector on the system board. 3. Using a Phillips #1 screwdriver, secure the control panel to the system with the screws. Installing and removing system components 69
Figure 46. Removing the control panel
Next steps
1.
Install the control panel
.
Installing the control panel
Prerequisites
1.
Follow the safety guidelines listed in
Safety Instructions
.
2.
Follow the procedure listed in
Before working inside your sled
.
Steps
1.
Align control panel with the slots on the system and slide it in.
2.
Connect the control panel cable to the connector on the system board.
3.
Using a Phillips #1 screwdriver, secure the control panel to the system with the screws.
Installing and removing system components
69