Dell PowerEdge MX740c EMC PowerEdge MX740c Installation and Service Manual - Page 103
Removing the mini Mezzanine card, Installing the Mezzanine card
![]() |
View all Dell PowerEdge MX740c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Figure 75. Installing the Mezzanine card Next steps 1. Follow the procedure listed in After working inside your sled on page 42. Removing the mini Mezzanine card Prerequisites CAUTION: To ensure proper system cooling, mini Mezzanine blank must be installed in the mini Mezzanine socket. NOTE: The removal of the blank is recommended only if you intend to install a mini Mezzanine card in this socket. 1. Follow the safety guidelines listed in Safety Instructions. 2. Follow the procedure listed in Before working inside the sled. NOTE: MX740c supports HBA330 MMZ and Fiber channel MMZ which is installed in mini Mezzanine slot. Steps 1. Pull the blue pull tag to raise the lever up of the mini Mezzanine card. 2. Holding the lever and the edge of the mini Mezzanine card, lift the mini Mezzanine card from the system. Installing and removing system components 103
![](/manual_guide/products/dell-poweredge-mx7000-emc-poweredge-mx740c-installation-service-manual-49e067c/103.png)