Dell PowerEdge MX740c EMC PowerEdge MX740c Installation and Service Manual - Page 23
Processor Settings details, Dead Line LLC
![]() |
View all Dell PowerEdge MX740c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Processor Settings details About this task The Processor Settings screen details are explained as follows: Option Description Logical Processor Enables or disables the logical processors and displays the number of logical processors. If this option is set to Enabled, the BIOS displays all the logical processors. If this option is set to Disabled, the BIOS displays only one logical processor per core. This option is set to Enabled by default. CPU Interconnect Speed Enables you to govern the frequency of the communication links among the CPUs in the system. NOTE: The standard and basic bin processors support lower link frequencies. The options available are Maximum data rate, 10.4 GT/s, and 9.6 GT/s. This option is set to Maximum data rate by default. Maximum data rate indicates that the BIOS runs the communication links at the maximum frequency that is supported by the processors. You can also select specific frequencies that the processors support, which can vary. For best performance, you should select Maximum data rate. Any reduction in the communication link frequency affects the performance of nonlocal memory accesses and cache coherency traffic. In addition, it can slow access to nonlocal I/O devices from a particular CPU. However, if power-saving considerations outweigh performance, you might want to reduce the frequency of the CPU communication links. If you do this, you should localize memory and I/O accesses to the nearest NUMA node to minimize the impact to system performance. Virtualization Technology Adjacent Cache Line Prefetch Hardware Prefetcher Software Prefetcher DCU Streamer Prefetcher DCU IP Prefetcher Sub NUMA Cluster Enables or disables the virtualization technology for the processor. This option is set to Enabled by default. Optimizes the system for applications that need high utilization of sequential memory access. This option is set to Enabled by default. You can disable this option for applications that need high utilization of random memory access. Enables or disables the hardware prefetcher. This option is set to Enabled by default. Enables or disables the software prefetcher. This option is set to Enabled by default. Enables or disables the Data Cache Unit (DCU) streamer prefetcher. This option is set to Enabled by default. Enables or disables the Data Cache Unit (DCU) IP prefetcher. This option is set to Enabled by default. Sub NUMA Clustering (SNC) is a feature for breaking up the LLC into disjoint clusters based on address range, with each cluster bound to a subset of the memory controllers in the system. It improves average latency to the LLC. Enables or disables the Sub NUMA Cluster. This option is set to Disabled by default. UPI Prefetch LLC Prefetch Dead Line LLC Alloc Directory AtoS FastGo IRQ Throttle Logical Processor Idling Enables you to get the memory read started early on DDR bus. The Ultra Path Interconnect (UPI) Rx path spawns the speculative memory read to Integrated Memory Controller (iMC) directly. This option is set to Enabled by default. Enables or disables the LLC Prefetch on all threads. This option is set to Disabled by default. When enabled, it opportunistically fill dead lines in LLC. When disabled, it never fill dead lines in LLC. This option is set to Enabled by default. AtoS optimization reduces remote read latencies for repeat read accesses without intervening writes. This option is set to Disabled by default. Enables you to select CR OOS Configuration Profiles. Enables you to throttle local requests that are targeting a remote address. Enables you to improve the energy efficiency of a system. It uses the operating system core parking algorithm and parks some of the logical processors in the system which in turn allows the corresponding Pre-operating system management applications 23
![](/manual_guide/products/dell-poweredge-mx7000-emc-poweredge-mx740c-installation-service-manual-49e067c/23.png)