Dell PowerEdge R760XA Installation and Service Manual - Page 104
Press the retaining clip on the four sides, Applying thermal grease
![]() |
View all Dell PowerEdge R760XA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Figure 66. Press the retaining clip on the four sides 4. If you are using an existing heat sink, remove the thermal grease from the heat sink by using a clean lint-free cloth. 5. Apply thermal grease in a quadrilateral design on the bottom of the heat sink. CAUTION: Applying too much thermal grease can result in excess grease coming in contact with and contaminating the processor socket. NOTE: The thermal grease syringe is intended for single use only. Dispose the syringe after you use it. Figure 67. Applying thermal grease 104 Installing and removing system components
![](/manual_guide/products/dell-poweredge-r760xa-installation-service-manual-7a27fb2/104.png)
Figure 66. Press the retaining clip on the four sides
4.
If you are using an existing heat sink, remove the thermal grease from the heat sink by using a clean lint-free cloth.
5.
Apply thermal grease in a quadrilateral design on the bottom of the heat sink.
CAUTION:
Applying too much thermal grease can result in excess grease coming in contact with and
contaminating the processor socket.
NOTE:
The thermal grease syringe is intended for single use only. Dispose the syringe after you use it.
Figure 67. Applying thermal grease
104
Installing and removing system components