Dell PowerEdge R760XA Installation and Service Manual - Page 59
Installing and removing system components, Safety instructions
View all Dell PowerEdge R760XA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
7 Installing and removing system components Topics: • Safety instructions • Before working inside your system • After working inside your system • Recommended tools • Optional front bezel • System cover • Drive backplane cover • Air shroud • Cooling fans • Side wall brackets • Drives • PERC module • Drive backplane • Cable routing • System memory • Processor and heat sink module • Expansion cards and expansion card risers • Optional serial COM port • Optional VGA port for liquid cooling module • Optional BOSS-N1 module • System battery • Optional internal USB card • Intrusion switch • Optional OCP card • Power supply unit • Trusted Platform Module • System board • LOM card and rear I/O board • Control panel Safety instructions NOTE: Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the system by yourself. CAUTION: Ensure that two or more people lift the system horizontally from the box and place it on a flat surface, rack lift, or into the rails. WARNING: Opening or removing the system cover while the system is powered on may expose you to a risk of electric shock. WARNING: Do not operate the system without the cover for a duration exceeding five minutes. Operating the system without the system cover can result in component damage. CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product. Installing and removing system components 59