Dell PowerEdge R760XA Installation and Service Manual - Page 90
Table 65. Configuration 0: 6 x 2.5-inch NVMe GPU
View all Dell PowerEdge R760XA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Figure 53. Configuration 0: 6 x 2.5-inch NVMe GPU NOTE: Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse sequential order. Table 65. Configuration 0: 6 x 2.5-inch NVMe GPU Order From To 1. SIG_PWR_1 (system board power BP_PWR_1 (Front backplane power connector) connector) 2. SL15_CPU1_PB8 (signal BP_DST_PA2 (backplane signal connector) connector on system board) 3. SL11_CPU2_PB6 (signal BP_DST_PA1 (backplane signal connector) connector on system board) 4. SL12_CPU2_PA6 (signal BP_DST_PB1 (backplane signal connector) connector on system board) 90 Installing and removing system components
Figure 53. Configuration 0: 6 x 2.5-inch NVMe GPU
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 65. Configuration 0: 6 x 2.5-inch NVMe GPU
Order
From
To
1.
SIG_PWR_1 (system board power
connector)
BP_PWR_1 (Front backplane power connector)
2.
SL15_CPU1_PB8 (signal
connector on system board)
BP_DST_PA2 (backplane signal connector)
3.
SL11_CPU2_PB6 (signal
connector on system board)
BP_DST_PA1 (backplane signal connector)
4.
SL12_CPU2_PA6 (signal
connector on system board)
BP_DST_PB1 (backplane signal connector)
90
Installing and removing system components