Dell PowerEdge R760XA Installation and Service Manual - Page 142
Installing the serial COM port, Removing the Serial COM port
![]() |
View all Dell PowerEdge R760XA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Figure 110. Removing the Serial COM port 5. Install the filler bracket if not replacing the serial COM port. Next steps 1. Replace the serial COM port. Installing the serial COM port Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. 3. Remove the air shroud. Steps 1. Open the latch on the expansion card riser and remove the filler bracket from the expansion card riser. 2. Slide the serial COM port into the expansion card riser and close the latch. 142 Installing and removing system components
![](/manual_guide/products/dell-poweredge-r760xa-installation-service-manual-7a27fb2/142.png)
Figure 110. Removing the Serial COM port
5.
Install the filler bracket if not replacing the serial COM port.
Next steps
1.
Replace the serial COM port
.
Installing the serial COM port
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
.
2.
Follow the procedure listed in the
Before working inside your system
.
3.
Remove the air shroud
.
Steps
1.
Open the latch on the expansion card riser and remove the filler bracket from the expansion card riser.
2.
Slide the serial COM port into the expansion card riser and close the latch.
142
Installing and removing system components