Dell PowerEdge R760XA Installation and Service Manual - Page 78
Installing the drive into the drive carrier
![]() |
View all Dell PowerEdge R760XA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Figure 40. Removing the drive from the drive carrier Next steps Install the drive into the drive carrier. Installing the drive into the drive carrier Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Remove the drive carrier. Steps 1. Insert the drive into the drive carrier with the drive connector facing towards the rear of the carrier. 2. Align the screw holes on the drive with the screws holes on the drive carrier. 3. Using a Phillips #1 screwdriver, secure the drive to the drive carrier with the screws. NOTE: When installing a drive into the drive carrier, ensure that the screws are torqued to 4 lbf-in. NOTE: If the drive carrier has Torx screw , use Torx 6 (for 2.5-inch drive) screwdriver to install the drive. 78 Installing and removing system components
![](/manual_guide/products/dell-poweredge-r760xa-installation-service-manual-7a27fb2/78.png)