Dell PowerEdge R760XA Installation and Service Manual - Page 75
Drives, Removing a drive blank
View all Dell PowerEdge R760XA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Figure 36. Installing the side wall bracket Next steps 1. Install the cooling fan cage assembly. 2. If removed, install the air shroud. 3. If removed, install the drive backplane cover. 4. Follow the procedure listed in the After working inside your system. Drives Removing a drive blank Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. If installed, remove the front bezel. CAUTION: To maintain proper system cooling, drive blanks must be installed in all empty drive slots. Steps Press the release button, and slide the drive blank out of the drive slot. Installing and removing system components 75
Figure 36. Installing the side wall bracket
Next steps
1.
Install the cooling fan cage assembly
.
2.
If removed,
install the air shroud
.
3.
If removed,
install the drive backplane cover
.
4.
Follow the procedure listed in the
After working inside your system
.
Drives
Removing a drive blank
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
.
2.
If installed,
remove the front bezel
.
CAUTION:
To maintain proper system cooling, drive blanks must be installed in all empty drive slots.
Steps
Press the release button, and slide the drive blank out of the drive slot.
Installing and removing system components
75