Dell PowerEdge R760XA Installation and Service Manual - Page 92
Table 67. Configuration 2: 8 x 2.5-inch NVMe RAID fPERC12
View all Dell PowerEdge R760XA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Figure 55. Configuration 2: 8 x 2.5-inch NVMe RAID fPERC12 NOTE: Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse sequential order. Table 67. Configuration 2: 8 x 2.5-inch NVMe RAID fPERC12 Order From 1. SIG_PWR_1 (system board power connector) 2. SL11_CPU2_PB6 (signal connector on system board) 3. SL12_CPU2_PA6 (signal connector on system board) 4. CTRL_SRC_SA1_PA1 (fPERC controller connector) 5. CTRL_SRC_SB1_PB1 (fPERC controller connector) To BP_PWR_1 (Front backplane power connector) CTRL_DST_PA1 (fPERC input connector) CTRL_DST_PB1 (fPERC input connector) BP_DST_PA1 (backplane signal connector) and BP_DST_PB1 (backplane signal connector) BP_DST_PA2 (backplane signal connector) and BP_DST_PB2 (backplane signal connector) 92 Installing and removing system components