Dell PowerEdge R760XA Installation and Service Manual - Page 174
Installing the LOM card and rear I/O board, Removing liquid cooling rear I/O board
![]() |
View all Dell PowerEdge R760XA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Figure 147. Removing liquid cooling rear I/O board Next steps 1. Replace the LOM card and rear I/O board. Installing the LOM card and rear I/O board Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. 3. Remove the system board. NOTE: The procedure to install the liquid cooling rear I/O board and rear I/O board is same. Steps 1. Align the connectors and slots on the LOM card or rear I/O board with the connector and standoffs on the system board. 2. Press the LOM card or rear I/O board until firmly seated on the system board connector. 3. Using a Phillips #2 screwdriver, secure the LOM card or rear I/O board to the system board with screws. 174 Installing and removing system components
![](/manual_guide/products/dell-poweredge-r760xa-installation-service-manual-7a27fb2/174.png)