Dell PowerEdge R760XA Installation and Service Manual - Page 14
Table 6. Rear view of the system continued, Ports, panels, or, slots, Description, System ID
![]() |
View all Dell PowerEdge R760XA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Table 6. Rear view of the system (continued) Item Ports, panels, or Icon slots Description NOTE: If the server stops responding during POST, press and hold the System ID button for more than five seconds to enter the BIOS progress mode NOTE: To reset the iDRAC (if not disabled on the iDRAC setup page by pressing F2 during system boot), press and hold the System ID button for more than 15 seconds. 12 OCP NIC card blank N/A The optional OCP NIC card supports OCP 3.0. The NIC ports are integrated on the OCP card which is connected to the system board. 13 NIC ports (optional) The NIC ports that are integrated on the LOM card provide network connectivity which is connected to the system board. 14 Power supply unit (PSU1) PSU1 is the primary PSU of the system. NOTE: For more information about the ports, see the Technical Specifications section. 14 DellPowerEdge R760xa system overview
![](/manual_guide/products/dell-poweredge-r760xa-installation-service-manual-7a27fb2/14.png)