Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 106

Command Mode Usage Information INTERFACE • To use special characters as a part of the description string, enclose the string in double quotes. • Spaces between characters are not preserved after entering this command unless you enclose the entire description in quotation marks ("text description"). • Enter a text string after the description command to overwrite any previous text string that you previously configured as the description. • Use the show running-configuration interface command to view descriptions configured for each interface. • The no version of this command deletes the description. Example OS10(conf-if-eth1/1/7)# description eth1/1/7 Supported Releases 10.2.0E or later duplex Configures duplex mode on the Management port. Syntax Parameters duplex {full | half | auto} • full - Specify to set the physical interface to transmit in both directions. • half - Specify to set the physical interface to transmit in only one direction. • auto - Sets the port to auto-negotiate speed with a connected device. Defaults Command Mode Usage Information Example Not configured CONFIGURATION This command can only be used on the Management port. The no version of this command removes the duplex mode configuration from the management port. OS10(conf-if-ma-1/1/1)# duplex auto Supported Releases 10.3.0E or later feature auto-breakout Enables front-panel Ethernet ports to automatically detect SFP pluggable media and autoconfigure breakout interfaces. Syntax feature auto-breakout Parameters None Default Not configured Command mode CONFIGURATION Usage information After you enter the feature auto-breakout command and plug a supported breakout cable in a QSFP+ or QSFP28 port, the port autoconfigures breakout interfaces for media type and speed. 106 Interfaces