Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 423

Usage Information Example Configure an arbitrary value in the IP address format for each router. Each router ID must be unique. Use the fixed router ID for the active OSPF router process. Changing the router ID brings down the existing OSPF adjacency. The new router ID becomes effective immediately. The no version of this command disables the router ID configuration. OS10(config)# router ospf 10 OS10(conf-router-ospf-10)# router-id 10.10.1.5 Supported Releases 10.2.0E or later router ospf Enters Router OSPF mode and configures an OSPF instance. Syntax router ospf instance-number Parameters instance-number-Enter a router OSPF instance number, from 1 to 65535. Default Not configured Command Mode CONFIGURATION Usage Information Assign an IP address to an interface before using this command. The no version of this command deletes an OSPF instance. Example OS10(config)# router ospf 10 Supported Releases 10.2.0E or later show ip ospf Displays OSPF instance configuration information. Syntax Parameters Default Command Mode Usage Information Example show ip ospf [instance-number] instance-number - View OSPF information for a specified instance number (1 to 65535) Not configured EXEC None OS10# show ip ospf 10 Routing Process ospf 10 with ID 111.2.1.1 Supports only single TOS (TOS0) routes It is an Autonomous System Boundary Router It is Flooding according to RFC 2328 Convergence Level 0 Min LSA origination 0 msec, Min LSA arrival 1000 msec Min LSA hold time 5000 msec, Max LSA wait time 5000 msec Number of area in this router is 1, normal 1 stub 0 nssa 0 Area (0.0.0.0) Number of interface in this area is 3 SPF algorithm executed 38 times Area ranges are Supported Releases 10.2.0E or later Layer 3 423