Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 783

sflow sample-rate Configures the sampling rate. Syntax sflow sample-rate value Parameter value - Enter the packet sample rate, from 4096 to 65535. The default is 32768. Default 32768 Command Mode CONFIGURATION Usage Information Sampling rate is the number of packets skipped before the sample is taken. For example, if the sampling rate is 4096, one sample generates for every 4096 packets observed. The no version of the command resets the sampling rate to the default value. Example OS10(conf)# sflow sample-rate 4096 Supported Releases 10.3.0E or later sflow source-interface Configures an interface as source for sFlow. The sFlow agent uses IP address of the configured source interface as agent IP address. Syntax Parameters sflow source-interface {ethernet node/slot/port[:subport] | loopback loopbackID | port-channel port-channel-ID | vlan vlan-ID} • ethernet node/slot/port[:subport]-Enter the physical interface type details. • loopback loopback-ID-Enter the loopback interface details. The loopback ID ranges from 0 to 16383. • port-channel port-channel-ID-Enter the port channel details. The port channel ID ranges from 1 to 128. • vlan vlan-ID-Enter the VLAN details. The VLAN ID ranges from 1 to 4093. Default Command Mode Usage Information Disabled CONFIGURATION The no version of this command removes the configuration from the interface. Example (Ethernet) OS10(config)# sflow source-interface ethernet 1/1/1 Example (Loopback) OS10(config)# sflow source-interface loopback 1 Example (portchannel) Example (VLAN) OS10(config)# sflow source-interface port-channel 1 OS10(config)# sflow source-interface vlan 10 Supported Releases 10.4.1.0 or later sFlow 783