Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 131

You can configure only one vfabric in F_Port mode. You can apply the configured vfabric to multiple Ethernet interfaces. You can also add the Ethernet interfaces to a port-channel and apply the vfabric to the port-channel. Example configuration OS10(config)# feature fc domain-id 100 OS10(config)# vfabric 100 OS10(conf-vfabric-100)# name 100 OS10(conf-vfabric-100)# vlan 1023 OS10(conf-vfabric-100)# fcoe fcmap 0xEFC64 OS10(conf-vfabric-100)# zoneset activate set OS10(conf-vfabric-100)# zone default-zone permit OS10(conf-vfabric-100)# exit OS10(config)# interface ethernet 1/1/30 OS10(conf-if-eth1/1/30)# vfabric 100 F_Port commands The following commands are supported on F_Port mode: fc alias Creates an FC alias. After creating the alias, you can add members to the FC alias. An FC alias can have a maximum of 255 unique members. Syntax fc alias alias-name Parameters alias-name - Enter a name for the FC alias. Defaults Not configured Command Mode CONFIGURATION Usage Information The no version of this command deletes the FC alias. To delete an FC alias, first remove it from the FC zone. Example OS10(config)# fc alias test OS10(config-fc-alias-test)# member wwn 21:00:00:24:ff:7b:f5:c9 OS10(config-fc-alias-test)# member wwn 20:25:78:2b:cb:6f:65:57 Supported Releases 10.3.1E or later fc zone Creates an FC zone and adds members to the zone. An FC zone can have a maximum of 255 unique members. Syntax Parameters Defaults Command Mode Usage Information fc zone zone-name zone-name - Enter a name for the zone. Not configured CONFIGURATION The no version of this command deletes the FC zone. To delete an FC zone, first remove it from the FC zoneset. Fibre Channel 131