Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 752
OS10config-pmap-queuing# class c2, OS10config# policy-map type queuing p2
View all Dell PowerSwitch S4128F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 752 highlights
trust-map dot1p dot1p-map-name trust-map dscp dscp-map-name qos-map traffic-class queue-map-name 7 Apply the qos trust policy to ingress traffic in SYSTEM-QOS or INTERFACE mode. service-policy input type qos trust-policy-map-name 8 Apply the queuing policy to egress traffic in SYSTEM-QOS or INTERFACE mode. service-policy output type queuing policy-map-name 9 Enable ETS globally in SYSTEM-QOS mode or on an interface/interface range in INTERFACE mode. ets mode on Configure ETS OS10(config)# trust dot1p-map dot1p_map1 OS10(config-trust-dot1pmap)# qos-group 0 dot1p 0-3 OS10(config-trust-dot1pmap)# qos-group 1 dot1p 4-7 OS10(config-trust-dot1pmap)# exit OS10(config)# trust dscp-map dscp_map1 OS10(config-trust-dscpmap)# qos-group 0 dscp 0-31 OS10(config-trust-dscpmap)# qos-group 1 dscp 32-63 OS10(config-trust-dscpmap)# exit OS10(config)# qos-map traffic-class tc-q-map1 OS10(config-qos-tcmap)# queue 0 qos-group 0 OS10(config-qos-tcmap)# queue 1 qos-group 1 OS10(config-qos-tcmap)# exit OS10(config)# system qos OS10(config-sys-qos)# trust-map dot1p default OS10(config)# class-map type queuing c1 OS10(config-cmap-queuing)# match queue 0 OS10(config-cmap-queuing)# exit OS10(config)# class-map type queuing c2 OS10(config-cmap-queuing)# match queue 1 OS10(config-cmap-queuing)# exit OS10(config)# policy-map type queuing p1 OS10(config-pmap-queuing)# class c1 OS10(config-pmap-queuing)# bandwidth percent 30 OS10(config-pmap-queuing)# exit OS10(config)# policy-map type queuing p2 OS10(config-pmap-queuing)# class c2 OS10(config-pmap-queuing)# bandwidth percent 70 OS10(config-pmap-queuing)# exit OS10(config)# system qos OS10(config-sys-qos)# trust-map dot1p dot1p_map1 OS10(config-sys-qos)# trust-map dscp dscp_map1 OS10(config-sys-qos)# qos-map traffic-class tc-q-map1 OS10(config-sys-qos)# ets mode on OS10(config-sys-qos)# service-policy input type qos pclass1 OS10(config-sys-qos)# service-policy output type queuing p1 View ETS configuration OS10# show qos interface ethernet 1/1/1 Interface unknown-unicast-storm-control : Disabled multicast-storm-control : Disabled broadcast-storm-control : Disabled flow-control-rx : Disabled flow-control-tx : Disabled ets mode : Disabled Dot1p-tc-mapping : dot1p_map1 752 Converged data center services