Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 444

OS10(config-router-ospfv3-100)# show configuration ! router ospfv3 100 area 0.0.0.1 encryption ipsec spi 401 esp des 1234567812345678 md5 12345678123456781234567812345678 Troubleshoot OSPFv3 You can troubleshoot OSPFv3 operations, as well as check questions for any typical issues that interrupt a process. • Is OSPFv3 enabled globally? • Is OSPFv3 enabled on the interface? • Are adjacencies established correctly? • Are the interfaces configured for L3 correctly? • Is the router in the correct area type? • Are the OSPF routes included in the OSPF database? • Are the OSPF routes included in the routing table in addition to the OSPF database? • Are you able to ping the link-local IPv6 address of adjacent router interface? Troubleshooting OSPFv3 with show Commands • View a summary of all OSPF process IDs enabled in EXEC mode. show running-configuration ospfv3 • View summary information of IP routes in EXEC mode. show ipv6 route summary • View summary information for the OSPF database in EXEC mode. show ipv6 ospf database • View the configuration of OSPF neighbors connected to the local router in EXEC mode. show ipv6 ospf neighbor View OSPF Configuration OS10# show running-configuration ospfv3 ! interface ethernet1/1/1 ip ospf 100 area 0.0.0.0 ! router ospf 100 log-adjacency-changes OSPFv3 Commands area authentication Configures authentication for an OSPFv3 area. Syntax Parameters area area-id authentication ipsec spi number {MD5 | SHA1} key • area area-id - Enter an area ID as a number or IPv6 prefix. • ipsec spi number - Enter a unique security policy index (SPI) value (256 to 4294967295). • md5 - Enable MD5 authentication. • sha1 - Enable SHA-1 authentication. 444 Layer 3