Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 606
deny (IPv6
View all Dell PowerSwitch S4128F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 606 highlights
Parameters • protocol-number - (Optional) Enter the protocol number identified in the IP header, from 0 to 255. • icmp - (Optional) Enter the ICMP address to deny. • ip - (Optional) Enter the IP address to deny. • tcp - (Optional) Enter the TCP address to deny. • udp - (Optional) Enter the UDP address to deny. • A.B.C.D - Enter the IP address in dotted decimal format. • A.B.C.D/x - Enter the number of bits to match to the dotted decimal address. • any - (Optional) Enter the filter type to subject routes to. - capture - (Optional) Capture packets the filter processes. - dscp value - (Optional) Deny a packet based on the DSCP values, from 0 to 63. - fragment - (Optional) Use ACLs to control packet fragments. • host ip-address - (Optional) Enter the keyword and the IP address to use a host address only. Default Command Mode Usage Information Example Not configured IPV4-ACL The no version of this command removes the filter. OS10(config)# ip access-list testflow OS10(conf-ipv4-acl)# deny udp any any Supported Releases 10.2.0E or later deny (IPv6) Configures a filter to drop packets with a specific IPv6 address. Syntax deny [protocol-number | icmp | ipv6 | tcp | udp] [A::B | A::B/x | any | host ipv6-address] [A::B | A::B/x | any | host ipv6-address] [capture | dscp value | fragment] Parameters • protocol-number - (Optional) Enter the protocol number identified in the IP header, from 0 to 255. • icmp - (Optional) Enter the ICMP address to deny. • ipv6 - (Optional) Enter the IPv6 address to deny. • tcp - (Optional) Enter the TCP address to deny. • udp - (Optional) Enter the UDP address to deny. • A::B - Enter the IPv6 address in dotted decimal format. • A::B/x - Enter the number of bits to match to the IPv6 address. • any - (Optional) Enter so that all routes are subject to the filter: - capture - (Optional) Capture packets the filter processes. - dscp value - (Optional) Deny a packet based on the DSCP values, from 0 to 63. - fragment - (Optional) Use ACLs to control packet fragments. • host ipv6-address - (Optional) Enter the keyword and the IPv6 address to use a host address only. Default Command Mode Not configured IPV6-ACL 606 Access Control Lists