Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 337

Example OS10(conf-router-neighbor)# fall-over Supported Releases 10.3.0E or later fast-external-fallover Resets BGP sessions immediately when a link to a directly connected external peer fails. Syntax Parameters Default Command Mode Usage Information fast-external-fallover None Not configured ROUTER-BGP Fast external fall-over terminates the EBGP session immediately after the IP unreachability or link failure is detected. This only applies after you manually reset all existing BGP sessions. For the configuration to take effect, use the clear ip bgp command. The no version of this command disables fast external fallover. NOTE: To configure these settings for a non default VRF instance, you must first enter the ROUTERCONFIG-VRF sub mode using the following commands: 1 Enter the ROUTER BGP mode using the router bgp as-number command. 2 From the ROUTER BGP mode, enter the ROUTER BGP VRF mode using the vrf vrf-name command. Example OS10(conf-router-bgp-10)# fast-external-fallover Supported Releases 10.3.0E or later inherit template Configures a peer group template name that the neighbors use to inherit peer-group configuration. Syntax inherit template template-name Parameters template-name - Enter a template name, up to 16 characters. Default Not configured Command Mode ROUTER-NEIGHBOR Usage Information When network neighbors inherit a template, all features enabled on the template are also supported on the neighbors. The no version of this command disables the peer group template configuration. Example OS10(conf-router-neighbor)# inherit template zanzibar Supported Releases 10.2.0E or later listen Enables peer listening and sets the prefix range for dynamic peers. Syntax listen ip-address [limit count] Layer 3 337