Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 711

system qos Enters SYSTEM-QOS mode to configure system-level service policies. Syntax system qos Parameters None Default Not configured Command Mode CONFIGURATION Usage Information None Example OS10(config)# system qos OS10(config-sys-qos)# Supported Releases 10.2.0E or later trust-map Configures trust map on an interface or on system QoS. Syntax Parameters trust-map {dot1p | dscp} {default | trust-map-name} • dot1p - Apply dot1p trust map. • dscp - Apply dscp trust map. • default - Apply default dot1p or dscp trust map. • trust-map-name - Enter the name of trust map. Default Command Mode Disabled INTERFACE SYSTEM-QoS Usage Information Example Use this command to apply the trust map on interface or System QoS. The no version of this command removes the applied trust map from the interface or System QoS. OS10(config)# interface ethernet 1/1/10 OS10(conf-if-eth1/1/10)# trust-map dot1p default OS10(conf-if-eth1/1/10)# trust-map dot1p d1 OS10(config)# interface ethernet 1/1/2 OS10(conf-if-eth1/1/2)# trust-map dscp default OS10(conf-if-eth1/1/2)# trust-map dscp d2 OS10(config)# system qos OS10(config-sys-qos)# trust-map dot1p default OS10(config-sys-qos)# trust-map dscp d2 Supported Releases 10.4.1.0 or later Quality of service 711