Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 512

Parameters time year-month-day Enter time in the format hour:minute:second, where hour is 1 to 24; minute is 1 to 60; second is 1 to 60. For example, enter 5:15 PM as 17:15:00. Enter year-month-day in the format YYYY-MM-DD, where YYYY is a four-digit year, such as 2016; MM is a month from 1 to 12; DD is a day from 1 to 31. Default Command Mode Usage Information Example Not configured EXEC Use this command to reset the system time if the system clock is out of synch with the NTP time. The hardwarebased real-clock time (RTC) resets to the new time. The new system clock setting is applied immediately. OS10# clock set 18:30:10 2017-01-25 Supported Releases 10.2.1E or later clock timezone Sets the time zone used for the system clock. Syntax clock timezone timezone-string Hours Minutes Parameters • Enter timezone-string which is the name of the time zone. • Enter Hours offset from UTC, ranging from -23 to 23. • Enter Minutes offset from UTC, ranging from 0 to 59. Default Command Mode Usage Information Example Not configured CONFIGURATION Universal time coordinated (UTC) is the time standard based on Greenwich Mean time. To set the time zone for the system clock, enter the difference of hours between UTC and your time zone. OS10(config)# clock timezone IST 5 30 Supported Releases 10.3.0E or later show clock Displays the current system clock settings. Syntax show clock Parameters None Default Not configured Command Mode EXEC Usage Information The universal time coordinated (UTC) value is the number of hours that your time zone is later than or earlier than UTC/Greenwich mean time. Example OS10# show clock 2017-01-25T11:00:31.68-08:00 512 System management