Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 549

(Up): Interface up (Dwn): Interface down (Dis): Interface disabled Uplink State Group : Defer Time : Upstream Interfaces : Downstream Interfaces: 1 Status : Enabled,up Name : UFDGROUP1 10 second(s) Eth 1/1/7:1(Up) Eth 1/1/1(Dwn) Eth 1/1/2(Dwn) Eth 1/1/3(Dwn) Eth 1/1/4(Dwn) Eth 1/1/5(Dwn) Eth 1/1/9:2(Dwn) Eth 1/1/9:3(Dwn) OS10(conf-uplink-state-group-1)# show configuration ! uplink-state-group 1 downstream ethernet1/1/1-1/1/5 downstream ethernet1/1/9:2-1/1/9:3 upstream ethernet1/1/7:1 UFD commands clear ufd-disable Overrides the uplink-state group configuration and brings up the downstream interfaces. Syntax Parameters clear ufd-disable {interface interface-type | uplink-state-group group-id} • interface-type - Enter the interface type. • group-id - Enter the uplink state group ID, from 1 to 32. Default Command Mode Usage Information Example None EXEC This command manually brings up a disabled downstream interface that is in UFD-disabled error state. After the downstream interface is up, it is not disabled until there are changes in the upstream interfaces. This command does not have effect on downstream interfaces that are already up or interfaces that are not part of the UFD group. OS10# clear ufd-disable interface ethernet 1/1/2 OS10# clear ufd-disable uplink-state-group 1 Supported Releases 10.4.0E(R3) or later defer-time Configures timer to defer UFD actions on downstream ports. Syntax Parameters Default Command Mode Usage Information defer-time timer timer- Enter the timer value in seconds, ranging from 1 to 120. Disabled UPLINK-STATE-GROUP You can view the timer details configured using the show uplink-state-group [group-id] detail command. The no version of this command disables the timer. System management 549