Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 52

no switchport ip address 172.17.4.1/24 Linux shell commands You can execute a single command, or a series of commands using a batch file from the Linux shell. • Use the -c option to run a single command. admin@OS10:/opt/dell/os10/bin$ clish -c "show version" New user admin logged in at session 10 OS10# show version Dell EMC Networking OS10-Enterprise Copyright (c) 1999-2018 by Dell Inc. All Rights Reserved. OS Version: 10.4.1.0X Build Version: 10.4.1.0.X.9 Build Time: 2018-06-12T22:18:40-0700 System Type: S4148F-ON Architecture: x86_64 Up Time: 2 days 03:37:25 User admin logged out at session 10 admin@OS10:/opt/dell/os10/bin$ • Use the -B option along with a batch file to execute a series of commands. configure terminal router bgp 100 neighbor 100.1.1.1 remote-as 104 no shutdown Execute the batch file. admin@OS10:/opt/dell/os10/bin$ clish -B ~/batch_cfg.txt New user admin logged in at session 15 Verify the BGP configuration executed by the batch file. admin@OS10:/opt/dell/os10/bin$ clish -c "show running-configuration bgp" New user admin logged in at session 16 ! router bgp 100 ! neighbor 100.1.1.1 remote-as 104 no shutdown admin@OS10:/opt/dell/os10/bin$ User admin logged out at session 16 SSH commands You can execute commands remotely using an SSH session. This is supported only for show commands. • Enter the show command along with SSH. $ ssh admin@ip-address show-command $ ssh [email protected] "show version" [email protected]'s password: 52 Getting Started