Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.1.0 - Page 604
ACL commands, clear ip access-list counters
![]() |
View all Dell PowerSwitch S4128F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 604 highlights
3 Define ACL rules that include the keywords capture session session-id in CONFIGURATION mode. The system only considers port monitoring traffic that matches rules with the keywords capture session. ip access-list 4 Apply the ACL to the monitored port in INTERFACE mode. ip access-group access-list Enable flow-based monitoring OS10(config)# monitor session 1 type local OS10(conf-mon-local-1)# flow-based enable OS10(config)# ip access-list testflow OS10(conf-ipv4-acl)# seq 5 permit icmp any any capture session 1 OS10(conf-ipv4-acl)# seq 10 permit ip 102.1.1.0/24 any capture session 1 OS10(conf-ipv4-acl)# seq 15 deny udp any any capture session 2 OS10(conf-ipv4-acl)# seq 20 deny tcp any any capture session 3 OS10(conf-ipv4-acl)# exit OS10(config)# interface ethernet 1/1/1 OS10(conf-if-eth1/1/1)# ip access-group testflow in OS10(conf-if-eth1/1/1)# no shutdown View access-list configuration OS10# show ip access-lists in Ingress IP access-list testflow Active on interfaces : ethernet1/1/1 seq 5 permit icmp any any capture session 1 seq 10 permit ip 102.1.1.0/24 any capture session 1 seq 15 deny udp any any capture session 2 seq 20 deny tcp any any capture session 3 View monitor sessions OS10(conf-if-eth1/1/1)# show monitor session all S.Id Source Destination Dir SrcIP DstIP DSCP TTL State Reason 1 ethernet1/1/1 ethernet1/1/4 both N/A N/A N/A N/A true Is UP ACL commands clear ip access-list counters Clears ACL counters for a specific access-list. Syntax clear ip access-list counters [access-list-name] Parameters access-list-name - (Optional) Enter the name of the IP access-list to clear counters. A maximum of 140 characters. Default Not configured Command Mode EXEC Usage Information If you do not enter an access-list name, all IPv6 access-list counters clear. The counter counts the number of packets that match each permit or deny statement in an access-list. To get a more recent count of packets matching an access list, clear the counters to start at zero. To view access-list information, use the show access-lists command. Example OS10# clear ip access-list counters 604 Access Control Lists
![](/manual_guide/products/dell-powerswitch-s3048on-os10-enterprise-edition-user-guide-release-10410-b76d862/604.png)